WaveOutWrite: Unterschied zwischen den Versionen

Aus API-Wiki
Wechseln zu: Navigation, Suche
(Die Seite wurde neu angelegt: __NOTOC__ Die API-Funktion waveOutWrite weißt das Ausgabegerät an, den übergebenen Audiobuffer abzuspielen. <code vb> Declare Function waveOutWrite lib "winmm....)
 
Zeile 26: Zeile 26:
 
0 bei Erfolg, ansonsten Fehlercode.
 
0 bei Erfolg, ansonsten Fehlercode.
  
 +
==[OPTIONAL] Beispiel==
 +
In diesem Beispiel wird ein Gerät zur Ausgabe von 16 Bit 44.1kHz Mono Audiodaten geöffnet, zwei Buffer werden reserviert und in diesen werden Testdaten generiert. Schlussendlich werden die beiden Buffer ausgegeben und das Device wieder geschlossen.
 +
<code vb>
 +
'Module1
 +
Option Explicit
 +
 +
Private Declare Function waveOutOpen Lib "winmm.dll" (hWaveOut As Long, _
 +
        ByVal uDeviceID As Long, Format As Any, ByVal dwCallback As Long, _
 +
        ByVal dwInstance As Long, ByVal dwFlags As Long) As Long
 +
 +
Private Declare Function waveOutPrepareHeader Lib "winmm.dll" ( _
 +
        ByVal hWaveOut As Long, lpWaveInHdr As Any, ByVal uSize As Long) As Long
 +
 +
Private Declare Function waveOutUnprepareHeader Lib "winmm.dll" ( _
 +
        ByVal hWaveOut As Long, lpWaveInHdr As Any, ByVal uSize As Long) As Long
 +
 +
Private Declare Function waveOutClose Lib "winmm.dll" (ByVal hWaveOut As Long) As Long
  
 +
Private Declare Function waveOutWrite Lib "winmm.dll" (ByVal hWaveOut As Long, _
 +
        ByRef lpWaveOutHdr As WAVEHDR, ByVal uSize As Long) As Long
 +
               
 +
Private Type WAVEFORMATEX
 +
    wFormatTag          As Integer
 +
    nChannels          As Integer
 +
    nSamplesPerSec      As Long
 +
    nAvgBytesPerSec    As Long
 +
    nBlockAlign        As Integer
 +
    wBitsPerSample      As Integer
 +
    cbSize              As Integer
 +
End Type
 +
 +
Private Type WAVEHDR
 +
    lpData              As Long
 +
    dwBufferLength      As Long
 +
    dwBytesRecorded    As Long
 +
    dwUser              As Long
 +
    dwFlags            As Long
 +
    dwLoops            As Long
 +
    lpNext              As Long
 +
    Reserved            As Long
 +
End Type
 +
 +
Private Const WAVE_FORMAT_PCM As Long = 1
 +
Private Const CALLBACK_FUNCTION As Long = &H30000
 +
Private Const INVALID_HANDLE_VALUE As Long = -1
 +
Private Const WOM_DONE As Long = &H3BD
 +
 +
Private hDevice As Long
 +
 +
Private udtBuffer1Hdr As WAVEHDR
 +
Private btWaveOutBuffer1() As Byte
 +
 +
Private udtBuffer2Hdr As WAVEHDR
 +
Private btWaveOutBuffer2() As Byte
 +
 +
Private lBufferFinished As Long
 +
 +
Public Sub TestAudioOutput()
 +
    If OpenOutputDevice(0) Then
 +
        CreateTestData
 +
        If Not waveOutWrite(hDevice, udtBuffer1Hdr, LenB(udtBuffer1Hdr)) = 0 Then
 +
            'error
 +
        ElseIf Not waveOutWrite(hDevice, udtBuffer2Hdr, LenB(udtBuffer2Hdr)) = 0 Then
 +
            'error
 +
        End If
 +
       
 +
        CloseOutputDevice
 +
    Else
 +
        Debug.Print "Kann Gerät 0 nicht öffnen!"
 +
    End If
 +
End Sub
 +
 +
Private Sub CreateTestData()
 +
    'Diese Funktion erstellt zwei verschiedene Wellenformen in den beiden Buffern
 +
    'damit ein Unterschied hörbar ist.
 +
    Dim x As Long
 +
    Dim lSample As Long
 +
 +
    'Sägezahn Schwingung in Buffer 1:
 +
    lSample = 0
 +
    For x = 0 To UBound(btWaveOutBuffer1) Step 2
 +
        lSample = lSample + 5
 +
        If lSample > 32767 Then
 +
            lSample = 0
 +
        End If
 +
        btWaveOutBuffer1(x) = (lSample And &HFF00&) \ &H100
 +
        btWaveOutBuffer1(x + 1) = lSample And &HFF&
 +
    Next
 +
    'Sägezahn Schwingung in Buffer 2:
 +
    lSample = 0
 +
    For x = 0 To UBound(btWaveOutBuffer2) Step 2
 +
        lSample = lSample + 8
 +
        If lSample > 32767 Then
 +
            lSample = 0
 +
        End If
 +
        btWaveOutBuffer2(x) = (lSample And &HFF00&) \ &H100
 +
        btWaveOutBuffer2(x + 1) = lSample And &HFF&
 +
    Next
 +
End Sub
 +
 +
 +
Public Function OpenOutputDevice(DevID As Long) As Boolean
 +
    Dim udtWaveFormat As WAVEFORMATEX
 +
 +
    'Definition des abzuspielenden Formats:
 +
    With udtWaveFormat
 +
        .cbSize = 0
 +
        .wFormatTag = WAVE_FORMAT_PCM  'wave format
 +
        .nChannels = 1                  'mono
 +
        .nSamplesPerSec = 44100        '44.1 kHz
 +
        .wBitsPerSample = 16            '16 Bits pro Sample
 +
        .nBlockAlign = .nChannels * .wBitsPerSample / 8
 +
        .nAvgBytesPerSec = .nSamplesPerSec * .nBlockAlign
 +
    End With
 +
 +
    If waveOutOpen(hDevice, DevID, udtWaveFormat, AddressOf CallBack, 0, CALLBACK_FUNCTION) <> 0 Then
 +
        'Failed
 +
        hDevice = INVALID_HANDLE_VALUE
 +
    Else
 +
        'Device erfolgreich geöffnet, jetzt zwei buffer, jeweils 1/4 sekunde
 +
        '16 bit audio reservieren:
 +
        ReDim btWaveOutBuffer1(udtWaveFormat.nSamplesPerSec * udtWaveFormat.nBlockAlign * 0.25 - 1)
 +
        ReDim btWaveOutBuffer2(udtWaveFormat.nSamplesPerSec * udtWaveFormat.nBlockAlign * 0.25 - 1)
 +
        With udtBuffer1Hdr
 +
            .lpData = VarPtr(btWaveOutBuffer1(0))
 +
            .dwBufferLength = UBound(btWaveOutBuffer1) + 1
 +
            .dwUser = 1
 +
        End With
 +
        With udtBuffer2Hdr
 +
            .lpData = VarPtr(btWaveOutBuffer2(0))
 +
            .dwBufferLength = UBound(btWaveOutBuffer2) + 1
 +
            .dwUser = 2
 +
        End With
 +
        If waveOutPrepareHeader(hDevice, udtBuffer1Hdr, LenB(udtBuffer1Hdr)) Or _
 +
                waveOutPrepareHeader(hDevice, udtBuffer2Hdr, LenB(udtBuffer2Hdr)) <> 0 Then
 +
            CloseOutputDevice
 +
        Else
 +
            OpenOutputDevice = True
 +
        End If
 +
    End If
 +
End Function
 +
 +
Public Function CloseOutputDevice()
 +
    If hDevice <> INVALID_HANDLE_VALUE Then
 +
        waveOutUnprepareHeader hDevice, udtBuffer1Hdr, LenB(udtBuffer1Hdr)
 +
        waveOutUnprepareHeader hDevice, udtBuffer2Hdr, LenB(udtBuffer2Hdr)
 +
        waveOutClose hDevice
 +
        hDevice = INVALID_HANDLE_VALUE
 +
    End If
 +
End Function
 +
 +
Private Sub CallBack(ByVal hDev As Long, ByVal uMsg As Long, dwInstance As Long, _
 +
        dwParam1 As WAVEHDR, dwParam2 As Long)
 +
    If uMsg = WOM_DONE Then
 +
        lBufferFinished = lBufferFinished And (Not dwParam1.dwUser)
 +
    End If
 +
End Sub
 +
</code>
  
  

Version vom 12. Januar 2009, 15:37 Uhr

Die API-Funktion waveOutWrite weißt das Ausgabegerät an, den übergebenen Audiobuffer abzuspielen.

Declare Function waveOutWrite lib "winmm.dll" _

                Alias "waveOutWrite" ( _
                ByVal hWaveOut As Long, _
                ByRef lpWaveOutHdr As WAVEHDR, _
                ByVal uSize As Long) As Long


Parameter

hWaveOut

Handle des Devices zu dem der Buffer hinzugefügt werden soll. Siehe waveOutOpen.

lpWaveOutHdr

Zeiger auf die WAVEHDR Struktur des Buffers. Die Struktur muss mittels waveOutPrepareHeader vorbereitet worden sein.

uSize

Grösse der übergebenen WAVEHDR Struktur.

Rückgabe(n)

0 bei Erfolg, ansonsten Fehlercode.

[OPTIONAL] Beispiel

In diesem Beispiel wird ein Gerät zur Ausgabe von 16 Bit 44.1kHz Mono Audiodaten geöffnet, zwei Buffer werden reserviert und in diesen werden Testdaten generiert. Schlussendlich werden die beiden Buffer ausgegeben und das Device wieder geschlossen. 'Module1 Option Explicit

Private Declare Function waveOutOpen Lib "winmm.dll" (hWaveOut As Long, _

       ByVal uDeviceID As Long, Format As Any, ByVal dwCallback As Long, _
       ByVal dwInstance As Long, ByVal dwFlags As Long) As Long

Private Declare Function waveOutPrepareHeader Lib "winmm.dll" ( _

       ByVal hWaveOut As Long, lpWaveInHdr As Any, ByVal uSize As Long) As Long

Private Declare Function waveOutUnprepareHeader Lib "winmm.dll" ( _

       ByVal hWaveOut As Long, lpWaveInHdr As Any, ByVal uSize As Long) As Long

Private Declare Function waveOutClose Lib "winmm.dll" (ByVal hWaveOut As Long) As Long

Private Declare Function waveOutWrite Lib "winmm.dll" (ByVal hWaveOut As Long, _

       ByRef lpWaveOutHdr As WAVEHDR, ByVal uSize As Long) As Long
                

Private Type WAVEFORMATEX

   wFormatTag          As Integer
   nChannels           As Integer
   nSamplesPerSec      As Long
   nAvgBytesPerSec     As Long
   nBlockAlign         As Integer
   wBitsPerSample      As Integer
   cbSize              As Integer

End Type

Private Type WAVEHDR

   lpData              As Long
   dwBufferLength      As Long
   dwBytesRecorded     As Long
   dwUser              As Long
   dwFlags             As Long
   dwLoops             As Long
   lpNext              As Long
   Reserved            As Long

End Type

Private Const WAVE_FORMAT_PCM As Long = 1 Private Const CALLBACK_FUNCTION As Long = &H30000 Private Const INVALID_HANDLE_VALUE As Long = -1 Private Const WOM_DONE As Long = &H3BD

Private hDevice As Long

Private udtBuffer1Hdr As WAVEHDR Private btWaveOutBuffer1() As Byte

Private udtBuffer2Hdr As WAVEHDR Private btWaveOutBuffer2() As Byte

Private lBufferFinished As Long

Public Sub TestAudioOutput()

   If OpenOutputDevice(0) Then
       CreateTestData
       If Not waveOutWrite(hDevice, udtBuffer1Hdr, LenB(udtBuffer1Hdr)) = 0 Then
           'error
       ElseIf Not waveOutWrite(hDevice, udtBuffer2Hdr, LenB(udtBuffer2Hdr)) = 0 Then
           'error
       End If
       
       CloseOutputDevice
   Else
       Debug.Print "Kann Gerät 0 nicht öffnen!"
   End If

End Sub

Private Sub CreateTestData()

   'Diese Funktion erstellt zwei verschiedene Wellenformen in den beiden Buffern
   'damit ein Unterschied hörbar ist.
   Dim x As Long
   Dim lSample As Long
   'Sägezahn Schwingung in Buffer 1:
   lSample = 0
   For x = 0 To UBound(btWaveOutBuffer1) Step 2
       lSample = lSample + 5
       If lSample > 32767 Then
           lSample = 0
       End If
       btWaveOutBuffer1(x) = (lSample And &HFF00&) \ &H100
       btWaveOutBuffer1(x + 1) = lSample And &HFF&
   Next
   'Sägezahn Schwingung in Buffer 2:
   lSample = 0
   For x = 0 To UBound(btWaveOutBuffer2) Step 2
       lSample = lSample + 8
       If lSample > 32767 Then
           lSample = 0
       End If
       btWaveOutBuffer2(x) = (lSample And &HFF00&) \ &H100
       btWaveOutBuffer2(x + 1) = lSample And &HFF&
   Next

End Sub


Public Function OpenOutputDevice(DevID As Long) As Boolean

   Dim udtWaveFormat As WAVEFORMATEX

   'Definition des abzuspielenden Formats:
   With udtWaveFormat
       .cbSize = 0
       .wFormatTag = WAVE_FORMAT_PCM   'wave format
       .nChannels = 1                  'mono
       .nSamplesPerSec = 44100         '44.1 kHz
       .wBitsPerSample = 16            '16 Bits pro Sample
       .nBlockAlign = .nChannels * .wBitsPerSample / 8
       .nAvgBytesPerSec = .nSamplesPerSec * .nBlockAlign
   End With

   If waveOutOpen(hDevice, DevID, udtWaveFormat, AddressOf CallBack, 0, CALLBACK_FUNCTION) <> 0 Then
       'Failed
       hDevice = INVALID_HANDLE_VALUE
   Else
       'Device erfolgreich geöffnet, jetzt zwei buffer, jeweils 1/4 sekunde
       '16 bit audio reservieren:
       ReDim btWaveOutBuffer1(udtWaveFormat.nSamplesPerSec * udtWaveFormat.nBlockAlign * 0.25 - 1)
       ReDim btWaveOutBuffer2(udtWaveFormat.nSamplesPerSec * udtWaveFormat.nBlockAlign * 0.25 - 1)
       With udtBuffer1Hdr
           .lpData = VarPtr(btWaveOutBuffer1(0))
           .dwBufferLength = UBound(btWaveOutBuffer1) + 1
           .dwUser = 1
       End With
       With udtBuffer2Hdr
           .lpData = VarPtr(btWaveOutBuffer2(0))
           .dwBufferLength = UBound(btWaveOutBuffer2) + 1
           .dwUser = 2
       End With
       If waveOutPrepareHeader(hDevice, udtBuffer1Hdr, LenB(udtBuffer1Hdr)) Or _
               waveOutPrepareHeader(hDevice, udtBuffer2Hdr, LenB(udtBuffer2Hdr)) <> 0 Then
           CloseOutputDevice
       Else
           OpenOutputDevice = True
       End If
   End If

End Function

Public Function CloseOutputDevice()

   If hDevice <> INVALID_HANDLE_VALUE Then
       waveOutUnprepareHeader hDevice, udtBuffer1Hdr, LenB(udtBuffer1Hdr)
       waveOutUnprepareHeader hDevice, udtBuffer2Hdr, LenB(udtBuffer2Hdr)
       waveOutClose hDevice
       hDevice = INVALID_HANDLE_VALUE
   End If

End Function

Private Sub CallBack(ByVal hDev As Long, ByVal uMsg As Long, dwInstance As Long, _

       dwParam1 As WAVEHDR, dwParam2 As Long)
   If uMsg = WOM_DONE Then
       lBufferFinished = lBufferFinished And (Not dwParam1.dwUser)
   End If

End Sub


[PFLICHT] Quelle(n)

  • MSDN US-Libary